Home » Systems » PeakStore5 » PeakStore5 – Offline Diagnosis on up to 12 Channels
Here you meet us:
  • 12.04.2021 - 16.04.2021
  • 04.05.2021 - 05.05.2021
    Berlin
  • 06.05.2021
    Berlin

PeakStore5 – Offline Diagnosis on up to 12 Channels

Vibration measurements can easily be performed by the PeakStore5. The sensors have to be attached with magnets at the engine. Now, the PeakStore5 has to be started. The whole process just takes a few minutes. Then, you simply put back the sensors in the case again and log the measurements and is done.
The data collection is carried out with up to 12 vibration channels and one speed channel. At many drives, it is no longer necessary to implement sensors, to operate all necessary measuring positions. Furthermore, the PeakStore5 can be remote controlled via an app on a smartphone, so that no staff needs to be directly near the machine during the measurement. Diagnosis is done preferably by order analysis. So, speed ripples have no influence, and the measuring results are absolutely reliable. The operation is realized by a full-fledged integrated tablet PC and the software PAM. There you can look at the data directly and analyze it locally. But you can also store additional information such as photographs and measurement protocols. Or you ship all data directly to a service provider for analysis. Measurement times of 1.5 seconds up to 164 seconds and indefinite measurement times as well can be set. In case of the indefinite measurement time you can record with 12 channels, each with 51.2 kHz sampling rate, about 4 hours of measurement data.

A sampling frequency of more than 50 kHz seems to be rather high. However, sinusoidal vibrations are detectable up to a frequency of 25 kHz. In practice, this value will be lower, because of the characteristic of the antialiasing filter. Envelope analysis is used for the bearing diagnosis. Envelope analysis is capable to extract the force pulses, which are generated through bearing damages. These force pulses are linked with
the natural vibrations of the whole system via convolution. This natural vibrations of the system are the
really carriers of the diagnostic information from the damage to the acceleration sensor. The quality
of this natural vibrations has a significant influence on the quality of the diagnosis, itself. The frequencies of these natural vibrations are determinable, but usually different from machine to machine. In practice, the best diagnosis results are achieved, through broadband measurements. This results in the relatively high sampling frequency of 50 kHz of the PeakStore5.

The current vibration characteristics can already be read in the sensor overview.
The vibration channels must be configured once. Channel names as well as important data of the sensor are stored in the PeakStore5.
The sensor positions can then be noted in the electronic measurement protocol. The measurement protocol is permanently assigned to the measurement data.
Already during the measurement, time signals can be displayed individually or in any groups.
Spectra, order spectra, envelope spectra and envelope order spectra are also calculated during the measurement.
If an access point is available, the entire data can be exported to an FTP server immediately after the measurement.
This website uses cookies. By further use you agree to the use. Privacy statement.